VAC: VAC

Navigation überspringen


 

Seite durchsuchen





 

16th November 2012
electronica 2012:
VAC presents innovative materials at the world's leading trade show for components, systems and applications
Hanau / Frankfurt – "Advanced Materials - The Key to Progress"  – Hanau-based VACUUMSCHMELZE GmbH & Co. KG will prove the truth of this statement at this year's electronica (13 to 16 November in Munich), where the company will demonstrate its materials expertise. At stand 119 in Hall B5, VAC staff will inform visitors about the latest advanced developments in the company's dysprosium-reduced permanent magnet material VACODYM®. A model of the "Solar Impulse" aircraft, powered by solar energy alone, will serve as a fascinating example of the diverse applications for low-loss motors built using the new ULTRAVAC® 44 V6 alloy. VACODUR® 49 is another alloy used in high-speed motors and generators, offering magnetic and mechanical properties significantly superior to the classic electrical steel used in this field.

Read more about this

----------------------------------------------------------------------------------------------------

11th  September 2012
On Course for the World Record in eMobility:
From 0 to 100 kph in less than three seconds - thanks to electric power and VAC's magnetic materials
Hanau / Frankfurt – VACUUMSCHMELZE GmbH & Co. KG (Hanau) is a Sponsor of the University of Stuttgart's GreenTeam who compete in the Formula Student Electric racing series. VAC supplies its VACOFLUX® 50 high saturation magnetic alloy for the electric drives of the GreenTeam’s race car. The 30-strong team of students recently announced their intention to attempt to break the world record with their electric racing car and promptly succeeded. Their electric vehicle with the model number E0711-3, known to the students as E3, had to accelerate from zero to 100 kilometres per hour in less than four seconds. After two test runs under the supervision of an official timekeeper, the results have been confirmed that the car achieved the required acceleration in 2.93 seconds – a new world record. The GreenTeam's vehicle weighed in at 267 kg and was equipped with two electric motors delivering almost 140 hp of power and 1100 Nm torque. Adjusted for weight and power output, the E3 therefore outperformed any Ferrari.

Read more about this

----------------------------------------------------------------------------------------------------

3rd September 2012
Current and powerline transformers :
VACUUMSCHMELZE demonstrates its readiness for the technologies of today and tomorrow at the 2012 Metering 
Hanau / Frankfurt – VACUUMSCHMELZE GmbH & Co. KG is once again an exhibitor at Metering, Billing/CRM Europe, held at the Rai Convention Center in Amsterdam from 9 to 11 October. In Hall 1 at Stand A73, VAC will present its ranges of current transformers optimized for highly accurate and reliable metering in electronic electricity meters (smart meters) and compact powerline transformers for secure data transmission in AMM systems. In addition, the company will provide information on the latest developments in the field of high-precision current transformers for new advanced smart grid infrastructures.

Read more about this

----------------------------------------------------------------------------------------------------

14th June, 2012
40 per cent higher motor torque than electric steel:
VACUUMSCHMELZE presents new VACODUR 49 alloy at Coil Winding
Hanau / Frankfurt – At this year's Coil Winding, held in Berlin from 26 to 28 June, VACUUMSCHMELZE GmbH & Co. KG (Hanau) will present another new alloy at Stand 4413 in Hall 2.2: VACODUR® 49 has been developed for high-performance motors and
generators. The new alloy features a high saturation level of 2.35 T, and complies with the international ASTM A801 Alloy Type 1 standard. The magnetic and mechanical properties of the alloy can be optimised for specific applications by adjusting the heat treatment appropriately.
Dr. Niklas Volbers will give a talk on the new alloy at the INDUCTICA Conference, part of the trade show, on 27 June between noon and 12:30 pm.

Read more about this

----------------------------------------------------------------------------------------------------

24th May 2012
New alloy to be unveiled in Berlin:
VACUUMSCHMELZE presents ULTRAVAC 44 V6 at 2012 Coil Winding
Hanau / Frankfurt – At this year's Coil Winding trade show, VACUUMSCHMELZE GmbH & Co. KG (Hanau) will once again take the opportunity to present advanced materials designed to maximise the efficiency of electric motors. The highlight for 2012 at Stand 4413 in Hall 2.2 will be the company's new ULTRAVAC® 44 V6 alloy, with properties that significantly boost performance optimisation in high-efficiency electric motors. The highest-profile application of this at present is the new HB-SIB aircraft from the Solar Impulse project, the motor of which uses ULTRAVAC 44 V6 in its stator and rotor assembly. In addition, the magnetic drive of the motor contains magnetic systems comprising small bonded segments of VACODYM®. This design minimises eddy current losses in the rotor resulting in an exceptional motor efficiency of 98%.  

Read more about this

----------------------------------------------------------------------------------------------------

24th April 2012
VITROPERM - the universal material:
VACUUMSCHMELZE presents tape-wound and cut cores and power transformers at the 2012 PCIM in Nuremberg
Hanau / Frankfurt – VACUUMSCHMELZE GmbH & Co. KG (Hanau) will again attend this year's PCIM, the leading international trade show for power electronics, intelligent motion and power quality. At Stand 307 in Hall 11, the company's Cores and Components division will present its full portfolio of products, focusing this year on products from the nanocrystalline material VITROPERM® for power transformers and new IGBT drive transformers.

Read more about this

----------------------------------------------------------------------------------------------------

24th April 2012
Ideal for EMC applications:
VACUUMSCHMELZE presents cores and chokes of nanocrystalline VITROPERM® at the 2012 PCIM in Nuremberg
Hanau / Frankfurt – VACUUMSCHMELZE GmbH & Co. KG (Hanau) will again attend this year's PCIM, the leading international trade show for power electronics, intelligent motion and power quality. The company can be found at Stand 307 in Hall 11 with a full portfolio of products from its Cores and Components division. A focus this year will be toroidal tapewound cores and common mode chokes using the nanocrystalline material VITROPERM® for EMC applications

Read more about this

----------------------------------------------------------------------------------------------------

24th April 2012
VAC sensors in Nuremberg:
VACUUMSCHMELZE presents new additions to its current sensor range at PCIM 2012
Hanau / Frankfurt - The "Cores and Components" division of VACUUMSCHMELZE GmbH & Co. KG will present a selection of its current sensors at the 2012 PCIM in Nuremberg from 8th to 10th May. At Stand 307 in Hall 11, the Hanau-based company will demonstrate its materials expertise in the fields of future technologies and clean energy. Products on show include a range of current sensors from its comprehensive portfolio.In addition, Klaus Reichert will hold a presentation entitled "Current Sensors in Power Electronics" at the exhibition forum on Tuesday, 8th May at 11:20 am in Hall 12.

Read more about this

----------------------------------------------------------------------------------------------------

27th February 2012
Diversity and quality for all needs:
VACUUMSCHMELZE presents its materials expertise in Cores and Components at Tube & Wire 2012
Hanau / Frankfurt – VACUUMSCHMELZE GmbH & Co. KG (Hanau) will again attend the 2012 Tube & Wire (26 to 30 March) in Düsseldorf. At booth A49 in Hall 16, the Hanau-based company will once again live up to its credo "Advanced Materials - The Key to Progress". VAC aligns the materials it produces to the needs of its customers, optimizing technological and price/performance aspects and supplying the finished products with the precise material properties and dimensions required. For the company's customers, this means outstanding flexibility in addition to the possibility to deliver high-grade, specialist materials in batch sizes as small as 100 kg.

Read more about this

---------------------------------------------------------------------------------------------------

21st February 2012 
E-mobility as a growth area: 
VACUUMSCHMELZE demonstrates expertise and technology leadership at elektro:mobilia in Cologne
Hanau / Frankfurt – The automotive industry is constantly searching for innovations and production-ready ideas for eco-friendly and future-proof drive systems. In 2012, ZVEI (German Electrical and Electronic Manufacturers' Association) will again provide an opportunity for industry experts to meet and exchange experience at its fourth conference of electric mobility experts and accompanying trade show. VACUUMSCHMELZE GmbH & Co. KG (Hanau) will again attend the event, held this year on 22 and 23 February in Cologne. At elektro:mobilia the Hanau-based company will present its advanced inductors and EMC components, once again demonstrating its ability to meet the most sophisticated requirements of the innovation-driven automotive industry. The company's inductors for DC/DC converters, for example, feature compact design, minimum weight and high performance. VAC's rare earth permanent magnets are also in demand for many automotive applications.

Read more about this

----------------------------------------------------------------------------------------------------

16th February 2012
VAC materials - enhancing the efficiency of solar inverters: 
VACUUMSCHMELZE presents its expertise in advanced materials at the Photovoltaic Solar Energy Symposium in Bad Staffelstein
Hanau / Frankfurt – The 27th Photovoltaic Solar Energy Symposium will be held at Banz Monastery, Bad Staffelstein, from 29 February to 2 March 2012. VACUUMSCHMELZE GmbH & Co. KG (Hanau) will again take part, this year in the capacities of both sponsor and exhibitor. The company will present its innovative nanocrystalline materials, used in numerous passive components that deliver outstanding reliability, precision, price/performance ratio and energy efficiency for today's solar inverters.

Read more about this

Letztes Update : 16.11.2012

Contact

VACUUMSCHMELZE, s.r.o.
Personálny útvar
916 24 Horná Streda 1325/14
personalneodd@
vacuumschmelze.com

(vo formáte txt, pdf, doc; iné sú neakceptované)
Tel.:032/7772220